Cemplex CRS

Cemplex CRS is a concrete restoration system, not a coating. It rebuilds the wear surface itself to a 4,000 psi finish that reads as new concrete, not painted, with a 3-year sealer reapplication cycle and single-source accountability from one call.

Purpose-built for the surfaces residents see and feel every day, breezeways, balconies, stairwells, entries, and pool decks. Restored without demolition or resident displacement, and priced to fit a maintenance budget rather than a capital replacement project.

Epoxy coatings read as painted, not concrete. The embedded grit wears unevenly, the surface has to be mechanically ground off before recoating, and over time the cycle becomes a capital project. CRS breaks the coat, wear, grind, repeat cycle permanently.

Three forces are pushing Florida multifamily owners toward restoration. Insurance costs are up as much as 119% in some metros, post-Surfside legislation requires milestone structural inspections for older buildings, and new luxury supply is forcing Class B and C owners to upgrade or lose tenants.

Clean, prep, coat, seal. Each step has a job and skipping one means the next won't hold. The resurfacing mortar cures to 4,000 psi, color-matched and frost-resistant, then locked in with an aqueous nano-particle sealer that penetrates the surface rather than sitting on top.

CRS looks and performs like new concrete. Epoxy looks painted. CRS requires no grinding between applications. Epoxy requires mechanical grinding every cycle. CRS fits a maintenance budget. Epoxy becomes a capital project over time. The comparison is on the page and it's hard to argue with.

Concrete leveling restores slabs that are uneven, cracked, or worn without full replacement. Cemplex has the experience, knowledge, and manufacturer support to find the right solution for every floor.

CRS is a full restoration system, not a coating. Rebuilds the wear surface itself. Cures to 4,000 psi, color-matched, frost-resistant. A clean finish that reads as new and holds up like it.

Expert floor leveling using high-performance self-leveling underlayment. Flat, smooth, and installation-ready surfaces for commercial and residential projects of any scale.

Epoxy coats. CRS restores. Side by side, CRS wins on durability, appearance, downtime, and long-term cost. No grinding cycle. No painted look. One sealer reapplication every three years.

Clean. Prep. Coat. Seal. Each step has a job. Skip one and the next won't hold. CRS follows the full process every time so the result holds up under real traffic.

Ready to get a number? Submit your project details and a CRS rep will get back to you fast. No pressure, no fluff. Just honest answers and the best solution available.

We pressure wash the entire surface to remove grime, staining, and buildup. Grease and oil get degreased first because anything left on the slab will compromise the bond of everything that comes after it.

Cracks, divots, and pitting are repaired with the material that fits the condition, whether that's feather-edge fillers, epoxy injection, or patching mortars depending on what the slab needs. Sound concrete in good condition skips this step entirely.

A resurfacing mortar goes down as a full new coat across the slab, troweled smooth or broom-finished for slip resistance depending on the application. It cures to 4,000 psi, is color-matched to the surrounding concrete, and is frost-resistant.

An aqueous nano-particle sealer penetrates the surface rather than sitting on top as a film that wears from the outside down. It blocks water and stain infiltration at the source. Reapply every three years with no grinding, no disruption, and no resetting the clock.