--- title: "TDS - HYDROPHASE-P150 Gen2" url: https://stacklist.com/card/261fa074-7e32-44d4-9879-02b57c0864ae stack: https://stacklist.com/stack/42c6c47f-5e5b-4e51-a9ea-ca638a9282b9 summary: "Hydrophase P150 SL is an advanced hydraulic cement underlayment manufactured by Formulated Materials that eliminates mechanical surface preparation with its zero-shrinkage formula and achieves 4500+ psi compressive strength. The product is suitable for institutional, residential, and commercial applications with fast setting times and superior leveling properties." tags: "hydraulic-cement, underlayment, construction-materials, floor-preparation, zero-shrink, technical-data" key_entities: "Hydrophase P150 SL (technology), Formulated Materials, LLC (organization), Oklahoma City, OK (location), zero-shrinkage formula (concept), polymer-modified hydraulic cements (concept), LEED certification (concept)" classification: "reference" content_hash: "sha256:1f0a216810602b927d0939ce47e879d221945c64f4aa7969969c29da314627a3" acp_version: "0.2" token_counts_approximate: 2136 visibility: public agent_accessible: true status: "final" --- # TDS - HYDROPHASE-P150 Gen2 Data sheets are subject to change without notice. For latest revision, visit www.formulatedmaterials.com. TECHNICAL DATA SHEET Hydrophase ® P150 SL 1. Product Name Hydrophase ® P150 SL 2. Manufacturer Formulated Materials, LLC 3010 NW 149th St., SUITE 100 Oklahoma City, OK 73134 Tech Services : (844) 405-3676 www.formulatedmaterials.com www.formulated.info 3. Product Description HydroPhase ® P150 SL is an advanced hydraulic cement underlayment that eliminates the need for mechanical surface preparation. Its zero-shrinkage formula allows for a clean, prime, and pour installation, reducing labor costs and ensuring superior surface smoothness. This high-performance underlayment incorporates carefully washed and graded sand to provide exceptional flow when wet, and rock-hard strength when dry. Key Features • Engineered blend containing polymer-modified hydraulic cements. • Fast Setting; light trade traffic in 4 hours, normal traffic in 24 hours. • Zero-Shrink Formula – no mechanical prep required. • Superior leveling properties with minimal working of the material. • Surface is dense, smooth, abrasion and crack resistant. • Compressive strength achieves 4500+ psi in 28 days. • Pour 1/8" – 1-1/2" depths in a single pour. Suitable Substrates • Fully cured concrete. • Existing concrete. • Wood. • Structurally sound and properly primed substrates meeting L/360 deflection criteria. • 60 psi EPS board (Contact Hydrophase ® for installation bulletin). • All Treadstone ® Sound Attenuation Mats. Product Composition Proprietary hydraulic cement technology. Recommended Applications • Institutional buildings. • High-rise residential. • Commercial office spaces. • Retail spaces. • Single-family homes. • Multifamily renovations. • Renovations of old wood frame or concrete structures. Product Limitations • For pours greater than 1.5", contact Formulated Materials for technical assistance. • Do not install at temperatures below 40° F . • Surface profile is required when installing in areas with heavy traffic or loading over the surface . • A moisture vapor barrier is required for installations over crawl spaces or high-MVER slabs. • Not for exterior use or areas with long-term water exposure. • Hydrophase P150 is not a finished floor; a floor covering must be installed. • Extreme humidity or temperature fluctuations during curing may affect performance. • Limitations not to be construed as all inclusive. Packaging • 50 lb. bags / 56 bags per pallet / 2,500 lb. SuperSacks. 4. Technical data Applicable Standards ASTM Test Standard C109M Standard Test Methods for Compressive Strength of Hydraulic Cement Mortars F710 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring Data sheets are subject to change without notice. For latest revision, visit www.formulatedmaterials.com. TECHNICAL DATA SHEET Hydrophase ® P150 SL Environmental Considerations Formulated Materials is dedicated to environmental responsibility in product development and manufacturing processes. When used per applicable guidelines, this product may contribute to LEED ® certification. 5. Instructions General Surface Prep Ensure the surface is clean, dry and structurally sound. Repair any cracks, spalling, or unstable areas. Remove dust, dirt, oil, grease, and contaminants. Use mechanical methods (grinding, sanding) if needed. Verify moisture levels meet product requirements. Address excessive moisture if necessary. Apply primer as specified and allow it to dry thoroughly. Maintain recommended temperature and humidity. Avoid extreme conditions. Perform a final check to clear debris and confirm the surface meets all preparation guidelines before application. Installation of Product Always read the Safety Data Sheet (SDS) for full precautionary instructions before use. Tools Required • Mixing station with calibrated measuring equipment • Clean water source (potable water only) • Slump test kit (or 2" PVC pipe, plexiglass sheet, ruler, and mixing spatula) • Screed or gauge rake (for leveling) Surface Prep 1. Comply with Dust Regulations: Avoid using oil-based floor sweeps as they can interfere with adhesion. 2. Check Moisture Vapor Emission: If moisture conditions exist, test per ASTM F-1869 to ensure MVER does not exceed limits as communicated by the manufacturers of the final floor covering. Technical Chart Property Test Method Results Appearance Dry Powder Color Grey Flammability ASTM E84 Flame Spread: 0 Fuel Contribution; 0 Smoke Density: 0 Flow Excellent Water per 50# Bag 5 Qt. (4.75 liters) Yield 24 sq. ft. @ 1/4" depth Dry Density 110 – 120 lbs. per cu. ft. Compressive Strength ASTM C109M 24 hr. > 2,000 psi 7 day > 3,500 psi 28 day > 4,500+ psi Recommended Depths 1/8" – 1.5" in a Single Pour Installation Site Conditions • The building must be enclosed and heated to a minimum of 50°F for at least 5-7 days before and after installation. • Ensure work area is sealed, Hydrophase P150 is very low in viscosity and will flow through any open voids. • Provide adequate ventilation to ensure proper curing. • Once cured, apply HydroPhase ® APS Primer/Sealer before installing glue-down or thin-set floor coverings. • Always follow the Floor Covering Manufacturer’s recommendations. Water Quality • Use only clean, potable water from a municipal source. • Avoid using water from ponds, wells, or untested sources. Mixing Instructions • Measure Ingredients Accurately: – Mix on-site – water must be 20 - 22% of content by weight. – Ensure water temperature remains between 45° F - 90° F. – Use clean, potable water. • Mix Thoroughly – Mix for 2-3 minutes using a high-speed drill and ‘egg beater’ paddle set at 900 rpm. – Ensure all materials are fully incorporated, no lumps or dry clumps. – Short mixing times require more water to achieve proper flow, resulting in poor performance. – Do not overmix or move the mixer as it will entrap air. • Ensure Proper Slump: – Optimal slump range for P150: 11.5–12.25 inches Do not exceed 13"). – Conduct multiple slump tests throughout the pour for consistency. Application • Before application, test P150 on-site with an approved primer on a portion of the prepared substrate to assure proper bond is maintained after application. • The surface must be dry before application. Ensure to maintain proper temperature (40 ° F (7 ° C) and 90 ° F (32 ° C) during the application and maintained for a minimum of 48 hours after application. • P150 has an approximate work time of 20 minutes. Work time can be affected by temperature and humidity at the work site. • Always maintain a wet edge and plan your pour, crew size, and equipment accordingly. • Immediately after applying the material, distribute the material using a gauge rake and steel smoother. TECHNICAL DATA SHEET Hydrophase ® P150 SL © Formulated Materials • Rev. 05/2026 Formulated Materials, LLC 3010 NW 149th St., SUITE 100 Oklahoma City, OK 73134 Tech Services : (844) 405-3676 www.formulatedmaterials.com www.formulated.info Control Joints • Expansion and control joints should be honored throughout the pour as specified by the engineer. • Refer to ASTM F710 for detail. Curing & Protection • P150 is Self-Curing and does not require any sealants or curing compounds. • Do not use forced air during the first 8 hours of cure. • Ready for light foot traffic in 4 hours • Return to Trade Traffic the following day. Cleanup • Wash all tools with water promptly after finishing while material is still wet. • Wash hands with water immediately after application . • Cured material will require mechanical removal. Storage & Handling • Store in dry conditions. • 12 month Shelf Life from date of manufacture when stored according to directions. Health Precaustions • Follow the manufacturer’s Safety Data Sheets (SDS) and safety protocols for PPE. Conformance to Building Codes Installation must comply with all applicable local, state, and federal codes, regulations, and industry standards. For additional technical support, contact Formulated Materials or visit www.formulatedmaterials.com. 6. Product Warranty For details and complete warranty information, visit www.formulatedmaterials.com. 7. Product Maintenance Properly installed products do not require ongoing maintenance. 8. Technical Services Information For Technical Services, contact Formulated Materials at (844) 405-3676.